Air Conditioning Repair
Air Conditioning Repair Service in Greater Seattle & Tacoma
Our greater Seattle Air conditioning repair service & a/c maintenance services have been trusted for decades in the Seattle & Tacoma areas. A properly functioning A/C unit will make your residence more comfortable during the summertime, too! We are one of the best, top-rated AC Repair Company in Seattle or Tacoma. Our A/C repair technicians are licensed, insured, and provide estimates for a/c repairs before the job is started.
Heat Pump Installation & Repair Services in Seattle-Tacoma
 Do you have an ac unit that isn’t working properly? Do you need annual air conditioning maintenance? Our expertise and professional approach ensure quality a/c repair or maintenance in Seattle or Tacoma every time! Greater Seattle A/C Repair Service is one of the most efficient options for maintaining the ideal temperature conditions in your home or office.Â
Maintenance & Repairs for Central Air Conditioning Units
From routine Air conditioning system maintenance to simple A/C System repairs. Glendale Heating offers component replacement to complete installation. We perform A/C repair & maintenance services quickly and with expertise. You can feel at ease in your home no matter the season.
Refrigerant Leaks
If your air conditioner is low on refrigerant, either it was undercharged at installation or it leaks. If it leaks, simply adding refrigerant is not a solution. A trained technician should fix any leak, test the repair, and then charge the system with the correct amount of refrigerant. Remember that the performance and efficiency of your air conditioner are greatest when the refrigerant charge exactly matches the manufacturer’s specification and is neither undercharged nor overcharged. Refrigerant leaks can also be harmful to the environment.
Inadequate Maintenance
If you allow filters and air conditioning coils to become dirty, the air conditioner will not work properly, and the compressor or fans are likely to fail prematurely.
Electric Control Failure
The compressor and fan controls can wear out, especially when the air conditioner turns on and off frequently, as is common when a system is oversized. Because corrosion of wire and terminals is also a problem in many systems, electrical connections and contacts should be checked during a professional service call.
Sensor Problems
Room air conditioners feature a thermostat sensor, located behind the control panel, which measures the temperature of air coming into the evaporative coil. If the sensor is knocked out of position, the air conditioner could cycle constantly or behave erratically. The sensor should be near the coil but not touching it; adjust its position by carefully bending the wire that holds it in place.
Drainage Problems
When it’s humid outside, check the condensate drain to make sure it isn’t clogged and is draining properly. Room air conditioners may not drain properly if not mounted level.
Our Air Conditioning Technicians Will:
1. Check for the correct amount of refrigerant
2. Test for refrigerant leaks using a leak detector
3. Capture any refrigerant that must be evacuated from the system, instead of illegally releasing it into the atmosphere
4. Check for and seal duct leakage in central systems
5. Measure airflow through the evaporator coil
6. Verify the correct electric control sequence and make sure that the heating system and cooling system cannot operate simultaneously
7. Inspect electric terminals, clean and tighten connections, and apply a non-conductive coating if necessary
8. Oil motors and check belts for tightness and wear
9. Check the accuracy of the thermostat.
