How We Differentiate Between a Bad Ignitor and a Faulty Gas Valve During a No-Heat Call
When your furnace blows cold air, the culprit is often an ignition failure. Discover the precise diagnostic process professionals use to pinpoint a cracked ignitor or stuck gas valve.
By the Glendale Heating & Air Conditioning team · Reviewed by Sarah Turner, Third-Generation Owner · · 9 min
When the Heat Drops: Facing a No-Heat Emergency
The thermostat is set to 70 degrees, but the air blowing from your vents is ice cold—or worse, the heating system refuses to kick on at all. When your equipment fails unexpectedly, understanding how we differentiate between a bad ignitor and a faulty gas valve during a no-heat call is the key to restoring your home's comfort quickly and safely. A freezing November night in Seattle brings a damp, biting cold that seeps into your living spaces rapidly. When temperatures plummet, an unresponsive furnace transforms from a minor inconvenience into an urgent priority that threatens the safety of your home.
While homeowners often rely on our air conditioning services and Seattle AC repair during the warmer months, winter demands immediate, reliable heating solutions. The two most common culprits behind a sudden ignition failure are a cracked hot surface ignitor or a mechanically stuck gas valve. Resolving this issue requires a deep understanding of the exact moment the ignition sequence fails.
Navigating a sudden heating failure can be overwhelming, especially if you are unfamiliar with the equipment. One Seattle customer, a new homeowner experiencing their first winter with central heat, reached out during a bitter cold snap when their system failed to operate. A serviceman arrived promptly, performed a thorough basic service, and took the time to explain the controls and filter maintenance, highlighting how essential professional guidance is when you rely on complex machinery to keep your family safe. Proper diagnostics eliminate the guesswork and get the warm air flowing again.
Understanding the Modern Gas Furnace Sequence of Operations
Every modern gas furnace (strictly non-oil) operates on a highly specific, non-negotiable sequence of operations. This sequence is a built-in safety mechanism designed to ensure that combustion only occurs under perfectly controlled conditions. If any single step in this sequence fails, the system's control board will trigger a safety lockout, shutting down the process to prevent the dangerous buildup of unburned gas in your home. Understanding this sequence is the foundation of professional troubleshooting.
- The Thermostat Call: The process begins when the indoor temperature drops below your set point, and the thermostat sends a 24-volt signal to the furnace control board requesting heat.
- The Inducer Motor Starts: Before any gas is released, the draft inducer motor turns on. This small fan clears residual gases from the heat exchanger and establishes a safe draft to push exhaust out of the flue.
- The Pressure Switch Verifies Draft: A safety device called a pressure switch detects the negative pressure created by the inducer motor. If the venting is clear and safe, the switch closes, allowing the sequence to continue.
- The Ignitor Warms Up: The control board sends voltage to the hot surface ignitor, causing it to glow brightly.
- The Gas Valve Opens: Once the ignitor is at the correct temperature, the control board sends 24 volts to the gas valve, commanding it to open and release fuel into the burners.
- The Flame Sensor Confirms Combustion: The gas ignites, and a flame sensor detects the presence of fire. If no flame is detected within a few seconds, the system instantly shuts the gas valve down.
The Role of the Hot Surface Ignitor
The hot surface ignitor acts as the spark plug of your modern gas furnace, though it functions more like the filament in an incandescent light bulb. Made of specialized materials like silicon carbide or silicon nitride, it receives high voltage and glows white-hot to ignite the incoming fuel. Because it is subjected to extreme thermal cycling—heating up to hundreds of degrees and cooling down rapidly multiple times a day—it is a frequent point of failure over time. The material eventually becomes brittle, leading to microscopic cracks that break the electrical circuit.
The Function of the Gas Valve
The furnace gas valve is an electromechanical gateway. It contains internal solenoid coils that act as electromagnets. When the control board sends exactly 24 volts to these coils, they energize and lift a plunger, allowing fuel to flow into the manifold and out to the burners. This valve contains strict built-in safety redundancies; it will snap shut immediately if the voltage drops, if the flame sensor fails to detect a fire, or if any other safety switch trips.

Symptoms of Ignition Failure: Glowing vs. Clicking
When a furnace fails to produce heat, a professional technician begins the diagnostic process through careful observation. By watching and listening to the furnace during its startup sequence, technicians can often narrow down the root cause before ever touching a tool. Recognizing the audible and visual signs of an ignition failure is a critical first step, though it is important to note that these observations only guide the subsequent electrical testing.
The Glowing Ignitor Scenario: If a technician observes the hot surface ignitor glowing a bright, vibrant orange, but no flame appears, it indicates that the ignitor is doing its job. The failure is happening downstream in the sequence. This symptom often points directly toward a gas valve issue, a lack of incoming fuel supply, or a control board failing to send the command to open the valve.
The Clicking Board Scenario: Conversely, if the inducer motor runs and a faint click is heard from the control board (the sound of a relay closing to send power), but the ignitor remains completely dark, the problem is isolated earlier in the sequence. This typically indicates a burned-out ignitor, a broken wire, or a control board relay that is clicking but failing to pass the required voltage along.
| Symptom Observed | Where the Sequence Fails | Most Likely Culprit |
|---|---|---|
| Ignitor glows bright orange, no fire | Step 5 (Gas Delivery) | Faulty gas valve or no gas supply |
| Control board clicks, ignitor stays dark | Step 4 (Ignition Source) | Cracked ignitor or bad board relay |
| Burners light for 3 seconds, then shut off | Step 6 (Flame Verification) | Dirty or failing flame sensor |
| Inducer runs, nothing else happens | Step 3 (Draft Verification) | Blocked flue or bad pressure switch |
These visual and auditory cues are highly informative, but they are only the starting point. Professional technicians use these symptoms to determine which component requires rigorous multimeter testing, rather than jumping to conclusions based on observation alone.
Avoiding the "Parts Cannon" Approach to Heating Repair
One of the most significant differences between amateur guesswork and professional HVAC service is the reliance on empirical data. Our expert diagnostic sequence of operations is designed to avoid what the industry calls the "parts cannon" approach. The parts cannon is the costly mistake of replacing components based on assumptions or symptoms rather than electrical proof.
For example, if an ignitor fails to glow, an inexperienced individual might simply buy a new ignitor and install it. However, if the true issue is a failing control board relay that isn't sending voltage to the ignitor in the first place, the new part will also fail to glow. The homeowner has now paid for a part they didn't need, and the furnace is still broken. Methodical testing saves homeowners from paying for unnecessary replacement parts and ensures the root cause is addressed the first time.
A typical pattern we see involves routine service calls where a sudden furnace malfunction requires urgent attention. In one instance, a homeowner scheduled a fall service visit after their system stopped working. The technician arrived on time, bypassed the guesswork, and diagnosed the issue quickly using precise multimeter resistance (ohms) and voltage testing. By relying on hard electrical data, the technician made the necessary repairs promptly at a fair and honest price, proving that a professional diagnostic sequence finds the exact fault efficiently.
Professional Diagnostics: Testing the Hot Surface Ignitor
When a technician suspects a faulty ignitor, they do not rely on visual inspection alone. While some cracks in the silicon carbide are visible to the naked eye, many are microscopic and hidden. To verify component health safely and accurately, technicians use precise digital multimeters. This level of troubleshooting involves interacting with high-voltage electrical circuits and should never be attempted as a DIY project, as dealing with 120V systems and gas appliances requires professional licensing and specialized safety training.
Testing for Resistance (Ohms): The first step in testing an ignitor is to disconnect power to the furnace entirely. The technician then unplugs the ignitor from the wiring harness to isolate it. By setting the multimeter to measure resistance (ohms), they probe the two terminals of the ignitor plug. A healthy hot surface ignitor will typically read between 40 and 90 ohms, depending on the specific model. If the multimeter reads "OL" (open line) or infinite resistance, it proves mathematically that the internal element is broken and the ignitor must be replaced.
Testing for Voltage: If the ignitor has a healthy resistance reading but still refuses to glow during the heating cycle, the technician must verify that the furnace is actually providing power to the component. This requires carefully restoring power and testing the wiring harness during the exact moment of the sequence when the ignitor should activate. The technician looks for a reading of 120 volts AC. If the voltage is absent, the focus shifts to diagnosing a failing furnace control board or a compromised wiring harness.
Evaluating the Gas Valve and Fuel Supply
If the hot surface ignitor glows beautifully but the furnace still refuses to light, the diagnostic focus shifts downstream to the gas valve. Just like the ignitor, the gas valve must be tested electrically before any mechanical assumptions are made. Technicians rule out or confirm a bad gas valve using a strict set of multimeter resistance (ohms) and voltage testing procedures.
Verifying 24-Volt Commands: When the sequence reaches the point where the gas valve should open, the control board sends a low-voltage signal. The technician places their multimeter probes on the gas valve terminals to verify it is receiving a steady 24 volts AC. If the voltage is present but the valve does not "click" open and no gas flows, it strongly indicates a mechanical failure within the valve itself.
Mechanical Failures vs. Electrical Failures: A gas valve can fail in two distinct ways. An electrical failure means the internal solenoid coils have shorted out or broken, preventing the electromagnet from lifting the plunger. A mechanical failure means the valve is receiving the correct voltage and the coils are trying to work, but the internal diaphragm or plunger is physically stuck closed due to wear, debris, or age. In either case, a faulty gas valve cannot be repaired in the field; it must be completely replaced for safety reasons.
Checking the Fuel Supply: Before condemning a gas valve, a thorough professional will also verify the incoming gas pressure. Using a specialized tool called a manometer, the technician checks the gas line to ensure the home's utility meter or regulator is actually delivering fuel to the furnace. If there is no incoming gas pressure, even a brand-new gas valve will fail to produce a flame.
Year-Round System Health and Preventative Care
The extreme thermal stress that causes winter furnace breakdowns is part of the overall wear and tear your HVAC system endures throughout the year. The same blower motor that pushes warm air through your home in December is responsible for circulating cool air in July. Because these systems work constantly, preventative care is the best defense against sudden, freezing-night emergencies.
Routine inspections play a massive role in catching failing components early. During a comprehensive fall tune-up, a technician will test the multimeter resistance (ohms) of your hot surface ignitor. If the reading is creeping out of the manufacturer's acceptable range, they can recommend replacing it before it snaps on a cold night. This proactive approach ensures your modern gas furnace (strictly non-oil) operates reliably when you need it most.
Comprehensive HVAC care also means preparing for the changing seasons. As winter fades, transitioning to AC maintenance tune-ups ensures your cooling equipment is just as reliable. Furthermore, if your heating system is aging rapidly and requiring frequent component replacements like gas valves and ignitors, it may be time to evaluate the entire setup. Planning for a full system upgrade, including air conditioning installation, ensures seamless, efficient, and reliable year-round comfort for your home.
Frequently Asked Questions
How do HVAC techs test a furnace gas valve?
Technicians test a gas valve by verifying it receives the correct electrical signal and has proper fuel pressure. Using a multimeter, they check for 24 volts at the valve terminals during the ignition sequence. They also use a manometer to measure incoming and manifold gas pressure to ensure fuel is physically flowing through the valve when commanded.
What happens when a furnace ignitor fails?
When a furnace ignitor fails, the heating sequence halts completely to prevent unburned fuel from accumulating. The thermostat will call for heat, and the draft inducer motor will run, but the ignitor will not glow. Shortly after, the control board will recognize the failure and shut the system down, blowing cold air or nothing at all.
Why does the furnace ignitor glow but the gas doesn't light?
If the ignitor glows but no flame appears, the issue usually lies with the fuel delivery system. This symptom indicates the ignitor is working perfectly, but the gas valve is failing to open, the control board isn't sending 24 volts to the valve, or the home's gas supply has been interrupted.
How do you know if your furnace gas valve is bad?
A bad gas valve is typically diagnosed through a process of elimination using electrical meters. If a technician confirms that the valve is receiving exactly 24 volts from the control board and there is adequate incoming gas pressure, but the valve still refuses to open and release fuel, the valve is definitively faulty.
Why is my furnace clicking but not igniting?
A clicking sound usually comes from the relays on the furnace control board attempting to send voltage to the ignition components. If you hear a click but the furnace doesn't ignite, it often means the hot surface ignitor is cracked or broken, or the control board is failing to pass the necessary 120 volts to the ignitor.
Can a bad control board mimic a failed ignitor or gas valve?
Yes, a failing control board can easily mimic component failures. If the board's internal relays are damaged, it may fail to send 120 volts to a perfectly healthy ignitor or 24 volts to a functional gas valve. This is why professional multimeter testing is essential to trace the exact location of the voltage drop.
Ready for comfort you can count on?
Whether it's a furnace that quit on a cold morning or a whole new system, the Glendale team is ready. Honest pricing, expert work, and 87+ years behind every visit.
Hours & Emergency
- Mon–Sat: 8:00 AM – 7:00 PM
- Sun: Emergency On-Call Only
- Emergency line: (206) 243-7700

